,

How do I read my non-London Power or Octopus Energy smart meter?

How do I read my smart meter?

We can automatically read SMETS2 and Secure™ SMETS1 smart meters, but there are lots of different types of smart meters installed around the UK.

Here's our ultimate guide to taking manual readings from a smart meter if it's not one of the SecureTM ones that we install.

If yours was installed by us, find out how to take readings from it here.

Reading your electricity meter:

Your electricity reading will be a number followed by “KWH”. We don't need the numbers after the decimal place.

If your meter has more than one unit rate (for example, if you're on an Economy 7 tariff), you'll have to take a reading for each rate. The two readings will appear one after the other — generally followed by “R1” and “R2” (Rate 1 and Rate 2). There is no set rule as to which one is your peak rate reading and which is your offpeak. Your meter might have a sticky label indicating which is which, though.

After R1 and R2, a third reading might appear onscreen — “T”. This is the total of your peak and offpeak readings combined. You don't need to give us this one.

If your meter has A and B buttons:

  1. Press the A button.
  2. Keep on pressing this until you get to “TOTAL ACT IMPORT”.
  3. The number shown below this is your meter reading.

If your meter has a green A and a white B button:

  1. Press and hold the green A button for at least 2 seconds.
  2. Press A again and again to cycle through the displays.
  3. The first row of numbers you'll see is your meter reading.

If your meter has three unmarked buttons:

  1. Press the middle button.
  2. The number shown below “IMP” is your meter reading.

If your meter has an orange button and a blue button:

  1. Press the orange button.
  2. You'll see a row of numbers followed by “KWH”, this is your reading.

*If your meter has two buttons marked Reconnect and Display Select:

  1. Press the “Display” or “Display Select” button.
  2. Keep pressing until it scrolls through a number followed by kWh, this is your reading.

Reading your gas meter:

Your gas reading will be a number followed by “m3”. We don't need the numbers after the decimal place.

If your meter has A and B buttons only:

  1. Press the A button.
  2. Keep on pressing this until you get to “METER INDEX”.
  3. The number shown below this is your meter reading.

If your meter has three square red buttons (they might be labelled A, B, and C):

  1. Press the A (or left) button.
  2. You'll see a row of numbers followed by m3, this is your reading.

If your meter has a left arrow, a circle and a right arrow:

  1. Press the middle “circle” button.
  2. The screen will show “current meter reading” at the top.
  3. You'll see a row of numbers followed by m3, this is your reading.

If your meter has orange and blue arrow buttons:

  1. Press the orange button.
  2. You'll see a row of numbers followed by m3. This is your reading.

What can we help you with?

London Power is proudly supplied by Octopus Energy Ltd.

Octopus Energy Ltd is a company registered in England and Wales. Registered number: 09263424.
Registered office: UK House, 5th floor, 164-182 Oxford Street, London, W1D 1NN.

London Power Co. Ltd is a company registered in England and Wales. Registered number: 12113294.
Registered office: 5 Endeavour Square, London, United Kingdom, E20 1JN.